Zircon StudSensor i65 Center-Finding Stud Finder with DVD How-To Guide:
List Price : $34.99 Price : low price on store
List Price : $34.99 Price : low price on store
Product Description
Electronic Stud Finder, Multifunction, Center-Finding, Scan Depth 1 1/2 In, Scans Drywall, Wood, Paneling, Accuracy Stud Center Within 1/8 In, Stud Edge Within 3/16 In, Wire Warning Detection Within 6 In, Battery Type (1) 9V Alkaline, Stud Center And Edge Finding Capabilities, Deep Scan Mode, AC Wire Warning, LCD Screen, Auto Recalibration, Temp Range 40 to 120 F, Includes Battery.
- Locates the edges and center of wood or metal studs up to 1 1/2-Inch (38 mm) deep
- Easy-to-read LCD display, audio tone and the patented spotLite pointing system indicate stud center
- WireWarning detection indicates the presence of live, unshielded electrical wiring up to 2-Inch (51 mm) deep
- Should scanning begin over a stud, Zircon's patented "over-the-stud" indicator alerts the user to start the scan in a new location
- Have questions? Need more information? Call the Zircon Customer Service department at 1-800-245-9265, Monday-Friday 9am - 5pm PST. We'll be happy to help!
buy cheap Zircon StudSensor i65 Center-Finding Stud Finder with DVD How-To Guide on sale
Zircon StudSensor i65 Center-Finding Stud Finder with DVD How-To Guide Reviews
| 86 of 86 people found the following review helpful:  A Few Tips for Wood Lath & Plaster Walls, By This review is from: Zircon StudSensor i65 Center-Finding Stud Finder with DVD How-To Guide (Tools & Home Improvement) This i65 unit from Zircon works very well, based on my experience. I have been remodeling a very old home for three years, and it included removing and working with existing wood lath with plaster walls. Conventional wisdom says none of the modern-day Stud Sensors work with wood lath and plaster walls, and the reasons cited include... 1) The rows of wood lath can vary in thickness -- thereby, throwing off the reading depth of the sensor. 2) When plaster is applied, it is forced through the gaps in the wood lath and builds up behind the lath to lock the plaster to the wall upon drying. These varying thicknesses also throw off the accuracy of these stud sensors. Yes, I agree with all of that on merit -- but I've used the i65 successfully after realizing a few things. First of all, many owners never bother to read the instructions, and try to use these devices too quickly. Here are a few tips that might help... a) Set the unit flat against the... Read more 46 of 47 people found the following review helpful: Works flawlessly., By BlueSquares (Florida) - See all my reviews This review is from: Zircon StudSensor i65 Center-Finding Stud Finder with DVD How-To Guide (Tools & Home Improvement) I was researching these things like crazy. Everytime I found a good one, there would be a review saying it sucked. I finally went into the nearby Lowes to see them in person. Once there, I was just as lost. Then I noticed a display case Zircon had set up. They had a piece of drywall with a wooden stud behind it. Hanging below it dangled this Zircon unit begging to be tested. I ran it over the drywall and it found the stud every time. I did it at least 10 times and it gave perfect results. Even better, it shows you in 'real time' via the LCD display where the edges and center are. The LCD literally shows the stud moving across it while you slide the unit past the stud. When it reaches the center, it gives a loud beep and a red laser lights up showing you the exact center spot. I bought it and headed home. I ran all over the house. It found studs every time. I should note my home was built in 1996 and contains smooth normal drywall and gypsum walls. I'm very... Read more 16 of 18 people found the following review helpful:  Good for the price, By This review is from: Zircon StudSensor i65 Center-Finding Stud Finder with DVD How-To Guide (Tools & Home Improvement) This is a nice little (not so little, though) tool to have. I could find my studs with good accuracy. The drywalls in my house (5/8 inch thick) had a textured surface, so i used a manila folder on top while scanning (as said in the video manual). One problem i have seen so far is that if you press the stud finder lightly on the wall, it may not detect anything. You have to move it slow and pressed a little hard to the wall. But if i dont use any cardboard underneath while scanning, i dont have to press that hard. I thought this device would tell me if it is a metal stud or wood stud. But this one does not have that feature. it will detect anything (metal or wood) underneath, but it wont tell you what is beneath the wall. for that, you have to buy the higher end models. |
› See all 51 customer reviews...
products reviews of cheap Zircon StudSensor i65 Center-Finding Stud Finder with DVD How-To Guide for sale Low Price online store, Save Shipping, and Free 30 Day Returns. Compare prices Zircon StudSensor i65 Center-Finding Stud Finder with DVD How-To Guide at main stores.
No comments:
Post a Comment